振动筛+固定溜槽+挖斗脱水机+卧式离心机

砂金提取方案

【沙金提取设备流程概述】

原料通过工程车辆送入进料斗内，通过高压水冲洗后进入振动筛内进行筛选，分级为粗料、中等料与细料三种规格，其中不合格的粗料直接通过溜槽排入废料池中；

合格的中等料通过两条固定式淘金毡溜槽进行回收，废料通过一台挖斗式脱水机脱水后由输送机传出。

细料通过料斗下部的一台8寸沙泵打入两台脱泥设备进行脱泥（可以防止泥浆在离心机内部离心力的作用下对金进行包裹形成泥球，极大的提高离心机回收率），脱泥后的细料排入料箱内通过沙泵打入两台1200#卧式全自动排矿离心机内进行精选，精选出的精料会自动排入精料箱内，废料排入废料池中，通过另一台挖斗脱水机脱水后由输送机输送至指定区域。以上为砂金设备,砂金机械,沙金选矿设备,砂金设备配置,砂金提取设备选金流程。

Technical process

The raw material getting into feed hopper then into vibrating screen by swilling of high pressure water to be classified into 3size,the big size,the normal price, the small size,the one in big size useless is directly to get rid to scrap pool.

The one in normal size to be recovered by 2fixed gold sluice with carpet,the scrap material to be transported by conveyor after the bucket chain machine taking water off.

The one in small size get into desliming machine by pumping of 1set 8inch sand pump (it’s efficiently the recover of gold concentrator by preventing surface gold covered by the muddy mineral),then the clay-off mineral getting into 2set of horizontal gold concentrator to get concentrate into mineral box,the scrap into scrap pool which finally transported to destination by conveyor after the process of taking water off by buck chain machine.

【沙金提取设备技术参数】
Detail parameter and price

名称 Production Name	规格 Specification	数量 Quantity	功率 Power	备注 Remark
进料斗 Feed hopper	4000*5000mm	1套	-
振动筛 Vibrating screen	2100*6000 双层筛 2layer vibrating screen 上层筛：前三米为提油杆(防止砸坏筛网)，后三米为聚氨酯筛网。下层筛：聚氨酯筛网。 1st floor: top 3m with suck rod(to protect screen mesh),the other 3m with polyurethane screen mesh, The 2nd floor: with polyurethane screen mesh.	1套	18.5	含浮体、支架等 Including base plate,holding frames etc
脱泥设备 Desliming	1500*3500mm 0.55KW	2套	1.1
离心机 Gold concentrator	卧式全自动排矿 21.5KW Horizontal automatic discharge type	2套	43
固定溜槽 Fixed gold sluice	淘金毡溜槽 1000*6000mm With carpet	2套	-	含淘金毡 With gold carpet
挖斗脱水机 Bucket chain machine	60# 11KW	2套	22
沙泵&料箱 Sand pump and mineral box	8寸 8inch	1套	22
沙泵&料箱 Sand pump and mineral box	6寸 6inch	1套	15
输送机 Transport conveyor	皮带宽度600mm,杆长6米,3KW Belt width 600mm,pole length 6m,3KW	2套	6
离心泵 Centrifugal pump	11KW	1台	11
水泵 Water pump	5.5KW	2台	15
配电柜 Electric cabinet		1套	-
总功率 Total power	153.6KW